Click on the image to check the artwork
The F1T series filter cartridge is made of Hydrophobic PTFE membrane which has very good resistance to corrosion, therefore it is widely used for the filtration of strong acid, alkali and strong polar organic solvent. All filter cartridges are produced in 100,000 grade clean workshop to ensure the high quality.
√ Naturally hydrophobic
√ Broad chemical compatibility, PH range 1-14
√ Low precipitation
√ High dirt holding capacity
√ Integrity tested before package
√ Sterile filtration of API
√ Strong polar chemical solvent
√ Fermentation gas
√ High-purity gas filtration in the electronics industry
√ Buffer solution
Media |
Single layer hydrophobic PTFE membrane |
Cage, Core, End |
PP |
Support |
PP |
O-Ring |
Silicone, Viton, EPDM, Teflon/Viton |
Removal Rating（μm） |
0.05, 0.1, 0.22, 0.45, 1.0, 3.0, 5.0 |
Outer diameter |
68mm |
Length |
5”, 10”, 20”, 30”, 40” |
Filtration Area |
≥0.6 m2 /10” |
End Cap Type |
222/Fin, 226/Fin, 222/Flat, 226/Flat/DOE |
Operating Temperature |
B1: PP cage＜60℃ |
| B2: PP cage+ SS end liner＜85℃ | |
| B3: PP cage+ SS liner ＜95℃ | |
Forward direction |
4bar (23℃) |
Reverse direction |
2bar (23℃) |
Steam sterilization |
123℃@30min |
Endotoxin |
＜0.25EU/ml |
Dissolution |
≤50mg/10” |
Bubble Point(Ethanol≥95%@23℃): |
0.1μm≥1.0bar |
| 0.22μm≥0.9bar | |
| 0.45μm≥0.3bar | |
Water intrusion（Water@23℃） |
≤2.5mL/min.10” @2620mbar |
Q: What is the minimum order of PTFE filter cartridge?
A: Minimum order is 1piece for PTFE filter cartridge.
Q: What is the period of validity for PTFE filter cartridge?
A: Expiry date is 2 years for PTFE filter cartridge.
http://www.filter-industrial.com/